Get 20% off today

Call Anytime

+16317412939

Send Email

Message Us

Our Hours

Mon - Fri: 08AM-6PM

Top Tips for Maintaining Your Can-Am Vehicle’s Performance

Possessing a Can-Am vehicle is an indication of an unusual and daring way of a lifestyle that goes past getting about. Whether you’re cruising around in a Spyder, destroying the trails in a Maverick, or taking on challenging tasks in a Defender, one thing generally continues as before: keeping your vehicle all set is critical. 

Regular maintenance safeguards your well-being and extends the life and efficiency of your vehicle. Here, we’ll survey a few superb tips to guarantee your Can-Am vehicle continues to perform well for a long time to come so you can capitalize on each ride.

1. Follow the Manufacturer’s Maintenance Schedule

Can-Am vehicles are intended to work at top proficiency, and the suggested maintenance recommended by the manufacturer means keeping them that way. For your particular model, extensive maintenance is scheduled for the owner’s manual. 

Follow this schedule to maintain your vehicle. It incorporates routine oil changes, filter replacements, and comprehensive inspections to keep it working at peak performance and prevent future issues. Think of it as your car’s durable and dependable handbook.

2. Check Fluid Levels Regularly

Coolant, engine oil, brake fluid, and gearbox fluid keep your Can-Am vehicle working. Maintaining its proper operation requires regularly checking the fluid levels and topping them on a case-by-case basis. 

Low fluid levels can cause engine damage, prompting overheating and premature part wear. Be cautious of leaks and promptly address them to forestall additional harm. Maintaining the fluid levels in your Can-Am will help keep it prepared for the road or trail.

3. Keep Air Filters Clean

Maintaining clean air filters is fundamental to maintaining engine efficiency in Can-Am vehicles, which are often driven on dirt roads and in difficult terrain. After some time, dirt and debris build up in air filters, decreasing airflow and engine performance. 

As coordinated by the manufacturer, air filters ought to be examined, cleaned, or replaced consistently to ensure ideal air intake, fuel efficiency, and motor life span. Think of it as providing your Can-Am engine with the necessary fresh air.

4. Inspect the Drive Belt

A drive belt transmits power from the engine to the wheels in Can-Am vehicles. The belt’s wear, fraying, and corrosion should be consistently checked to prevent issues and potential breakdowns. 

Reduced performance, sudden failures, and strange noises can indicate a ragged or torn drive belt. When you see any wear side symptoms, replace the drive belt to keep up with your Can-Am working flawlessly on any landscape. Try not to leave it till the latest possible second.

5. Maintain Proper Tire Pressure

Maintaining the right tire pressure is essential for stability, safety, and efficiency, whether you’re driving on the highway or rough terrain. Ensure the tire pressure on your Can-Am is within the allowed range by checking it often with a trustworthy gauge.

While underinflated tires can bring about poor traction and increased fuel consumption, overinflated tires can influence handling and ride comfort. Ensure the tires of your Can-Am are appropriately inflated for each outing to ensure smooth operation.

6. Inspect Suspension and Steering Components

Your Can-Am vehicle’s suspension and steering system extraordinarily affect its handling and comfort, particularly while exploring rough terrain. Regularly check these parts for wear indicators such as loose connections, worn bushings, and leaks. 

Whether you’re driving a car or exploring challenging routes, fixing any issues as soon as they arise can guarantee a smooth and safe trip. It will also help prevent further damage. To prevent old parts from ruining your fun, ensure your Can-Am suspension parts are in good working order before every trip.

7. Keep It Clean

Routine cleaning preserves the aesthetic appeal of your Can-Am vehicle and protects against corrosion and early wear, particularly during rough terrain excursions. 

Maintaining the exterior of your auto in great shape requires frequent washing, paying close attention to areas that are inclined to rottenness, and cleaning the underside to remove mud, sand, and debris. 

To guarantee that your Can-Am is in extraordinary condition for your upcoming adventures, consider getting a well-earned spa day.

8. Perform Regular Brake Inspections

Without question, any car’s most crucial safety component is its brakes, which must be regularly inspected to guarantee optimal operation. The braking system is exposed to additional pressure while driving Can-Am vehicles, as they frequently experience challenging terrain and weather.

It’s fundamental to regularly check for wear and tear on the braking lines, calipers, rotors, and pads. When stopping power is most needed, addressing any issues as soon as they arise can assist in avoiding brake failure and offer dependable stopping power.

9. Maintain Electrical Systems

Complex electrical systems in contemporary Can-Am vehicles power numerous parts, such as electronic fuel injection and lighting. Outstanding maintenance is essential for these systems to operate consistently. 

Regularly inspecting battery terminals, fuses, and electrical connections for corrosion or damage can prevent electrical issues that could leave you stranded. Ensure your battery is fully charged to forestall unplanned malfunctions and replace it if it shows any indications of deterioration.

10. Store Your Can-Am Properly

Proper storage is key to maintaining your Can-Am’s performance during inactive times, such as the winter or extended stretches between rides. Call your nearby Can-Am dealership for professional guidance on the best ways to store your car. 

Select a dry spot that is well-ventilated and free from direct daylight and precipitation. Consider using a breathable cover to safeguard it from dust and debris while maintaining airflow. 

Perform routine maintenance before storing, including oil changes, lubricating moving parts, and adding gasoline stabilizers on a case-by-case basis. 

Start the engine regularly and let it run for a few minutes to circulate fluids and prevent inside corrosion. When stored properly, your Can-Am is always prepared to hit the road or trail when adventure strikes.

Ride into the Future with Confidence

Sustaining the performance of your Can-Am vehicle is vital for ensuring a secure, enjoyable, and trouble-free riding experience. By executing these best practices, you can keep up with your vehicle’s performance, increment its life expectancy, and take advantage of your experience on the streets or trails. 

Remember that a very much-kept Can-Am is something other than a vehicle; it’s a trustworthy travel partner that can deal with any territory effortlessly. So lock in, get in the driver’s seat, and permit your Can-Am vehicle to take you on an experience that could only be described as epic.

Scroll to Top