Some of the most commonly used construction materials include dry walls, which are fundamental to any construction or renewal project. Drywall offers an easy-to-finish plane for walls and ceilings and can help increase insulation levels and acoustic qualities.
Drywall installation has become quite popular, and if you are planning to put drywall in your Edmonton home, there are certain factors to consider. In this article, you will find the critical points on installing drywall on houses in Edmonton.
This article will explain why getting services from a reliable drywall Installation contractor like Truerock Interior System in Edmonton is necessary.
What You Need To Know About Drywall Installation?
What Is Drywall?
Drywalls are widely used to complete the interiors of homes and other structures. They are constructed from a layer of gypsum with a paper face on both sides.
This is an ideal finishing material for interiors because it is relatively cheap, easy to install, and can be finished using different methods.
Also Read: Enhance Your Space With T-Bar Ceiling Installation
Types Of Drywall
The market offers various drywalls, each with its specific characteristics. Some of the most common types of drywall include:
- Standard drywall: This is the most popular type of drywall and can be used in most applications throughout a home.
- Fire-resistant drywall: This type of drywall is intended to maintain a fire rating longer than typical dry walls.
- Moisture-resistant drywall: There is also moisture-resistant drywall known as Green Muss, which is intended to prevent moisture damage.
- Sound-resistant drywall: This type of drywall is specially manufactured for use in places where sound control is essential.
Preparing For Drywall Installation
Tools And Materials
Before you begin installing drywall, you will need to gather the following tools and materials:
- Measuring tape.
- Pencil.
- Observed (either circular or reciprocating).
- Level.
- Hammer.
- Screwdriver.
- Drywall screws.
- Drywall tape.
- Joint compound.
- Sandpaper.
- Putty knife.
- Primer.
- Paint.
Surface Preparation
There are a few other things to consider while preparing the surface before installing drywalls.
This is important to help stick the drywall appropriately and to create a uniform surface to the structure’s interior.
Here are some tips for preparing the surface:
- Remove any old drywall: Remember, if you start using new drywall again, the old one must be jolted out.
- Patch any holes: If a hole in the wall or ceiling needs to be repaired, remember that the aim is to make the underfloor heating invisible.
- Ensure the surface is even: Take a level to ensure the ground is flat.
- Clean the surface: This surface must be clean and free of dust or particles.
Drywall Installation Techniques
1. Hanging Drywall Sheets
Once the wall surface preparation has been completed, you can proceed to the installation of drywall sheets. Here are the steps involved:
- Measure and cut the drywall sheets: Measure across the walls and ceilings to determine the size of the drywall sheets you require. Then, saw the sheets to the appropriate size.
- Attach the drywall sheets to the framing: You need to put the drywall sheets on the framing, and to do so, you must use drywall screws. The sheets must be well and adequately screwed to the framing.
- Joint taping: Apply drywall tape to join the joints in the drywall sheets properly.
- Joint mudding: It is covered over drywall tape to smooth the joint. Multiple layers or coats of joint compound are also necessary.
- Sanding: Then, sand the joint compound to smooth the entire surface.
- Priming: Tape the joints on the drywall and allow it to dry. Use a primer to seal off the surface and create the best background for painting.
2. Texturing And Finishing
After the drywall is primed, it is textured and finished. The achieved patterns are divided into different categories: orange peel, knockdown, and skip trowel.
The other is painting the drywall after applying the texture. Once the texture is used, one is free to paint the drywall.
Tips For Drywall Installation In Edmonton Homes
Tip #1: Climate Considerations
Edmonton has a specific climatic condition that may complicate the drywall installation work.
The climate can be hot or cold, and the relative humidity is sometimes high. It is necessary to be aware of these threats and take action against them.
Tip #2: Codes And Regulations For Construction
The installation of drywalls must follow Edmonton’s building codes and ordinances. Failure to do so may attract fines or other penalties.
Tip #3: Hiring A Professional
If you are not willing to install drywall yourself or simply do not have the time or knowledge to do so, it is crucial to seek a professional drywall contractor in Edmonton.
Many professional contractors in this region can offer excellent drywall installation services.
Conclusion
This article endeavours to provide tips for correct drywall installation in Edmonton homes.
We learn about the various types of drywalls, methods of preparing the surfaces for installing the walls, and steps involved in hanging, taping, and mudding the drywall.
We have also mentioned details about the climatic conditions of Edmonton, how they affect the codes to pass a building, and how important it is to hire a professional drywall contractor.
