Melbourne, Austrailia, 12 February 2025- People depend on their home’s water supply for daily activities. But have you ever turned on the hot tap, expecting clear water, only to be met with a cloudy white stream that looks like diluted milk?
Such water issues raise the question about the water quality. When the water is coloured, using a filter to purify the water still cannot ensure that the water is safe to consume.
It’s understandable that people in Melbourne turn to Neighbourhood Plumbing for expert advice to figure out and solve the problem. You can check this website for more information https://neighbourhoodplumbing.com.au/.
This blog will also dive deeper into the issue, helping you understand why tap water turns cloudy and how to tackle it the right way.
What Are the Causes Of Cloudy Water?
- Water pressure in the supply system
First, it’s important to know that the water in your supply system is kept under pressure, which allows it to hold onto more dissolved gases. When you turn the knob to stream hot water, it immediately weakens the capacity to keep hold of these gases. As a result, supersaturation occurs.
The gases dominate and exceed the limit that the water can tolerate. When the pressure in the pipes is released, the dissolved gases form tiny bubbles, causing the water to appear cloudy.
Generally, when you pour this water into a glass, the cloudiness will eventually evaporate from the bottom of the glass to the surface. It means that the milky water will not last long. However, if you want to prevent this situation from happening, you should begin by opening the cold water tap first before switching it to the hot one. This effort intends to remove the pressure from the supply system first before the water is heated.
- Water supplier activities
Another possible reason why your water gets cloudy is due to the water supplier’s activity in your area. They may be repairing the central network or shutting off the water mains in your neighbourhood. Therefore, when this issue occurs, you should ask your neighbours whether they also encounter the same problem.
If this scenario doesn’t only apply to you but also to everyone else, then the root problem may not be situated in your plumbing infrastructure and you don’t have to hire plumbing services in Melbourne. Instead, you should wait or contact the water supplier or local council to find out how long the project will take and what solution they’re offering.
- Clogged aerator
You can find an aerator at the faucet’s tip, designed to be easily twisted off. Sometimes a buildup of sediment gets into the end of the aerator and consequently delays the water circulation. This situation naturally creates water pressure and leads to the appearance of bubbles that cause cloudy water. In this case, you can clear the aerator using a solution made of vinegar and water. Let this mixture stay overnight, then rinse it with water the following morning. This method is effective temporarily, but you may consider upgrading your aerator for a long-term solution.
However, it would be wise to call Melbourne plumbers to conduct a careful inspection of your water tap and identify the actual cause of the cloudy water.
- Faulty water heater
If the water heater operates for a long time and doesn’t receive proper maintenance, it will only decrease its effectiveness. Aside from being damaged, there is also a possibility of obstruction made of accumulated sediment.
Should you discover the equipment is no longer in its prime condition, you should review when the last time it was professionally maintained. Regular maintenance ensures the proper functioning of the system, helping to prevent issues like cloudy water or reduced water quality. If it’s been a while since the last service, you should schedule an inspection and clean-up to keep the system running as it should.
Is It Safe to Consume a Cloudy Water?
Understandably, the primary concern that pops up in most homeowners’ minds will be whether it is safe to consume cloudy water. The answer to this question depends on the severity of the problem. If it strongly implies that the problem is just the air pressure and bubbles, consuming the water may not be dangerous, as long as the water eventually turns clear from the bottom up.
However, if the cloudiness persists, it may indicate a malfunctioning water heater, filtration system, or clogged aerator. In this case, it’s best to avoid consuming the water to prevent potential health risks.
Conclusion
In conclusion, there are several potential causes as mentioned above that can affect the water quality in your house. It is important to identify the root problem correctly in order to avoid mistakes that can create another problem.
If you are still not sure about the cause, you can rely on Neighbourhood Plumbing as their team of plumbers in Melbourne can make the right call thanks to years of experience in dealing with such issues. They can thoroughly inspect your system, identify the issue, and provide a reliable solution to restore the water quality in your home.
Media info:
Website: https://neighbourhoodplumbing.com.au
Email: Email info@neighbourhoodplumbing.com.au
Phone number: 0488 885 122
Address: Melbourne, Austrailia
